Product Details:
Minimum Order Quantity | 1 Piece |
Material | Mild Steel |
Automation Grade | Semi-Automatic |
Job Thickness | 1-2 mm |
Max Sheet Width | 0-200 mm |
Finish | Color Coated |
Specification:
Material Thickness | mm | 1.0 (20 Swg) | 1.6 (16 Swg) |
Material Used | mm | 32 | 32 |
Pocket Depth | mm | 13 | 13 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | MS |
Power | 0.37 KW |
Speed | 2800 RPM |
Power Source | Electric |
Voltage | 220-240 V |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | MS |
Frequency | 50/60 Hz |
Power | 0.33 HP to 5 HP |
Motor Speed | 2800 RPM |
H.P. | K.W. | Volt | Phase | R.P.M. | Wheel Size (mm) |
0.33 | 0.25 | 230 / 440 | 1/3/2012 | 3000 | 150 x 13 |
0.5 | 0.37 | 230 / 440 | 1/3/2012 | 3000 | 200 x 20 |
0.75 | 0.55 | 230 / 440 | 1/3/2012 | 3000 | 200 x 25 |
1 | 0.75 | 230 / 440 | 1/3/2012 | 3000 | 250 x 25 |
2 | 1.5 | 440 | 3 | 1500 | 300 x 40 |
3 | 2.2 | 440 | 3 | 1500 | 350 x 50 |
5 | 3.7 | 440 | 3 | 1500 | 400 x 50 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Slotting machine | 6 /10 /12 inches |
Rotary table dia | 11 Inch |
Throat Depth | 8 Inch |
Power Requirement | 1 Hp |
Length of Stroke | Inch | 6 | 10 | 12 |
Rotary table dia | Inch | 11 | 12 | 24 |
Throat Depth | Inch | 8 | 14 | 15 |
Power Required | HP | 1 | 2 | 3 |
Additional Information:
Product Details:
Material | Mild Steel |
Power Source | Electric |
Voltage | 220 - 240 V |
Brand | AECO |
Frequency | 50 - 60 Hz |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Material | MS |
Power | 1 HP |
Voltage | 415 V AC |
Frequency | 50-60 Hz |
Power Source | Electric |
Burring Machine is extensively used in forming the bottom seam of a can in preparation to setting down and double seaming. A flange is first turned at a right angle on the body of the can. Then a burr is turned greater than a right angle on the bottom piece. The bottom is then snapped over the flange on the body and the setting down machine is used to close the se in preparation for the double seaming machine.
The Burring Machine is one of the harder machines to master. Practice, practice, practice, is the best policy and don't get carried away with the amount of material you try to turn and several passes is necessary to obtain the best edge. Don't be surprised if you have to finish the edge with a stake and hammer.
Additional Information:
4.3/5
Reviewed by 123 Users
Most Relevant Reviews